August
2010
©
2007–2010
by
RadiSys
Corporation..
All
rights
reserved.
RadiSys
and
Procelerant
are
registered
trademarks
of
RadiSys
Corporation.
All
other
trademarks,
registered
trademarks,
service
marks,
and
trade
names
are
the
property
of
their
respective
owners.
*007-02531-0001*
PROCELERANT
®
CE915GM COM EXPRESS MODULE
QUICK START GUIDE
FOR USE WITH CE-AHSA ACTIVE HEATSINK
This
guide
describes
how
to
install,
configure,
and
operate
a
Procelerant
®
CE915GM
COM
Express
system.
The
CR100
FlexATX
carrier
board
is
used
as
the
sample
carrier
board,
and
the
CE
‐
AHSA
active
heatsink
is
used
as
the
sample
heatsink
in
this
guide.
Refer
to
the
Procelerant
CE915GM
COM
Express
Module
Product
Manual
for
detailed
features,
functionality,
and
specifications.
Where to get more product information
Visit
the
RadiSys
web
site
at
www.radisys.com
for
product
information
and
other
resources.
Downloads
(manuals,
release
notes,
software,
etc.)
are
available
at
www.radisys.com/downloads
.
Handling precautions
W
ARNING
!
• Handle the Procelerant COM Express module and
carrier board with care. Failure to employ
adequate anti-static measures can cause partial
or complete device failure, performance
degradation, or reduced operating life.To avoid
electrostatic discharge (ESD) damage to static-
sensitive components, it is strongly recommended
that you wear a grounded wrist strap or other
static-dissipating device when handling this
product. For further precautions and ESD
information, visit
www.radisys.com/esd
.
• The battery on the carrier board must be replaced
with the correct type of lithium cell battery (type
CR2032). Using any other battery may damage
the board.
