Radiometer Analytical TitraLab 870, Справочное руководство

Страница: 133 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 133
Global flush
burettes A “Global flush” function is available to expell the air bubbles that may
be trapped in the tubings. All installed burettes are flushed
simultaneously.
Perform the following operations:
1. Display the Burette functions menu:
2. Select all for Address .
3. Press 3 Global flush.
The “Global flush” procedure runs as follows:
• Empty 4 ml or the full burette (if burette volume < 4 ml),
• Fill,
• Empty 10 ml or the full burette (if burette volume < 10 ml),
• Fill.
Global variable A global variable is used to transfer a result from one method to
another. To assign a global variable to a result, select Gi (i = 1 to 10).
This global variable can be inserted into the equation used to
calculate the method result(s). Each of the 10 global variables can be
visualised in the GLP - Archives menu.
Never use these variables to transfer a result inside a same
method. However, you can use a global variable to transfer a
result from one method to another method of a same Coupled
method.
Enter in:
Edit method > Results