RadioMaster MT12, Инструкция по эксплуатации

Страница: 4 / 49

1. Overview
1.1. Introduction
Thank you for purchasing the RadioMaster MT12 radio system. Advanced and highly-versatile, MT12 is adaptable for
drivers of any skill level. To ensure safe and reliable operations, please read this manual carefully prior to use.
As the software and hardware are constantly improved, the information contained in this manual is subject to change
without prior notice. Please visit our website for up-to-date information and radio firmware.
MT12 is an open-sourced, ergonomic radio with powerful multi-protocol capability. Able to bind to most
contemporary protocols on the market, this is one radio to rule them all! MT12 runs EdgeTX, an open-sourced
operating system; for more information, please visit the EdgeTX link below.
-The RadioMaster team
1.2. Safety information
Radio-controlled models commonly contain sharp components like gears, rotating at high RPMs; when operating or
maintaining the model, always use common sense and proceed with caution.
Always disconnect power to the model during the assembly or maintenance process.
Never operate the MT12 radio system in the following conditions:
• In severe weather or strong windy conditions, such as rain, hail, snow, storms or electromagnetic environments.
• In limited visibility
• In the proximity of other people, property, high-voltage power lines, public roads, vehicles or animals
• When feeling unwell, or under the influence of drugs or alcohol.
• If the MT12 radio system/model is damaged or showing signs of interference.
• In areas with high 2.4GHz interference or where 2.4GHz radios are prohibited.
• When the Transmitter or receiver battery is low.
• In areas where local regulations prohibit the use of R/C models.
WARNING!
MT12 is pre-installed with the most stable firmware at the factory at time of release. please only attempt to update
the firmware if you are confident in the process. Incorrect firmware updates may cause the remote control to
become inoperable. Damage as a result of improper firmware update may not be covered under warranty.