7.
Telemetry
Telemetry is data received from the model to the radio from various sensors. These sensors may be included
in the radio receiver or flight controller or may be separate sensors, such as GPS, variometer, or
magnetometer. The received telemetry data can be displayed by EdgeTX in widgets, configured in alarms or
audio call-outs.
The Telemetry screen is where you configure these sensors to use in EdgeTX. Below are the following
configuration options:
7.1.
Sensors
Sensors portion of the Telemetry screen
All previously configured sensors are listed here. The list is collapsible by clicking on the
arrow icon
to the
right side of the
Sensors
label. Sensors that have not received data since the model was loaded or the
telemetry values were reset display
---
for the values. The asterisk
*
to the left of the sensor value will flash
when the sensor has received a data update. A solid asterisk
*
indicates that the sensors that are receiving
regular updates. Sensors that are no longer receiving regular updates will not be marked with the asterisk
*
.
for a list of commonly used sensors in EdgeTX.
The following options are listed under the sensor list.
•
Discover New:
When selected, it will look for new sensors on the model and automatically configure them. If
the sensor list is collapsed when a new sensor is discovered, the newly found sensor will be visible on the
sensor list (old sensors will remain collapsed/hidden).
•
Add New:
When selected, it will create a new blank sensor for that must be configured manually.
•
Delete All:
This option will delete all previously configured sensors.
•
No inst.
(ignore instances)
:
This option prevents multiple sensors from reporting the same telemetry data.
If no sensors are listed in the sensors section, you may need to select
Discover New
to detect the sensors.
Additionally, not all RF protocols transmit telemetry data.
If you long-press the
[Enter]
button for a specific sensor, the following options will be displayed:
•
Edit
: Allows you to edit the sensor's configuration options.
•
Copy
: Creates a copy of that sensor.
•
Delete
: Deletes that sensor.
See the
page for a detailed description of all the configuration options for setting up or
editing sensors.
Содержание MT12
Страница 5: ...1 3 Radio overview...
