RadioMaster MT12, Инструкция по эксплуатации

Страница: 24 / 49

•
Min - Defines the minimum that is allowed for the global variable.
•
Max - Defines the maximum value that is allowed for the global variable.
•
Popup - When enabled, a pop-up window will be displayed on the main screen when the value of this global
variable changes during normal use.
•
FM1 -> FM8 - Allows you to select the global variable inheritance for the Drive mode. Long press the field to
switch between Own and Inheritance mode. In Own mode, you can define the global variable value for the
selected Drive mode. In Inheritance mode, you can select the Drive mode that the global variable will inherit
the value from.
3.3. Fail Safe
4in1 Multi-Protocol Failsafe
Failsafe settings determine what the receiver will do if radio communication is lost. The receiver is configured using
settings sent from the radio as part of the radio transmission.
Configuring failsafe settings ensures that the receiver behaves in an expected way if radio communications between
the radio and receiver are lost, for example by reducing throttle to -100%, or activating a return-to-home (RTH or
RTL) function in the flight controller.
Different receiver types require different failsafe procedures, further information: https://www.multi-
module.org/using-the-module/protocol-options#failsafe
ExpressLRS Fail safe
Once the receiver is bound and the model has been correctly setup on the radio open the ExpressLRS LUA script by
pressing the [SYS] Button and using the roller to run the ExpressLRS script.
Once the script is loaded use the roller to scroll to “> Other Devices” to open the receiver settings. Scroll to “[Set
Failsafe Pos]” and press enter on the roller. The position of the trigger, wheel, knobs, switches, joystick will now be
recorded as the failsafe position on the receiver.
Failsafe Mode Receiver Behaviour
Not Set Failsafe not configured.
Hold
Hold the last values received before radio
communication was lost.
Custom
Use the radio to configure specific values for
the receiver to use.
No Pulses All channels go to their minimum values.
Receiver
Use values configured on the receiver using
the receiver's configured failsafe settings.