RadioMaster MT12, Инструкция по эксплуатации

Страница: 13 / 49

2.6. Switch and Joystick Expansion Modules
The MT12 features interchangeable expansion modules and includes a two 2 positions switch module and a 4 way
Joystick module. You can choose the module you wish to install based on your own preferences.
Hardware Installation
Two 2 Position switch module:
4 way Joystick module:
Software Setup
Two 2 Position Switch module:
For the two 2 Position switch plate, press the SYS button and then Page > button to reach the HARDWARE page.
Using the roller scroll down to S3 and S4. Set both S3 and S4 to “Switch”. Next, scroll down to FL1 and FL2. Set FL1 to
S3 and choose “2POS”. Set FL2 to S4 and choose “2POS”.
4 Way Joystick module :
For the 4 way Joystick plate, press the SYS button and then Page > button to reach the HARDWARE page. Using the
roller scroll down to S3 and S4. Set S3 to Axis X and set S4 to Axis Y. Once this is set, please enter the calibrations
screen and do a calibration (as you would for the wheel, trigger and knobs). Please note, at the time of writing this
manual there is no visual display of the 4 way joy stick movement when calibrating, however the calibrations is taking
please. Please move the 4 way joystick across both axis and complete the calibration.