RadioMaster MT12, Инструкция по эксплуатации

Страница: 10 / 49

2.3 Reset
Selecting Reset from the pop-up menu will give you the following options:
Reset flight - When selected, this option:
•
Resets all timers configured with a persistence setting of Flight to zero.
•
Resets all discovered telemetry sensor values.
•
Resets all logical switch states
•
Triggers the same checks as loading the model - i.e. throttle position, switch state, is failsafe set check,
display pre-flight checklist if configured, stuck keys test, etc.
Reset timer 1 / 2 / 3 - Resets only the selected timer to zero regardless of the configured persistence setting.
Reset telemetry - This option resets all discovered telemetry sensor values
2.4. Statistics
The Statistics screen presents you with statistics regarding radio usage. All data is reset once the radio is powered off.
The following information is provided:
•
SES - The amount of time that the radio has been turned on.
•
THR - The amount of time that the throttle has was above the 0% stick position.
•
TH% - The amount of time that the throttle has was above the 50% stick position.
•
TM1/2/3 - The current values of Timer 1, Timer 2, and Timer 3.
•
Throttle Graph - Shows the throttle percentage over time.
Long pressing the [Roller] or [Dial] button will reset the Statistics and Debug screens.
Pressing [PAGE>] will take you to the Debug screens.
Debug screen 1