RadioLink Electronic Ltd
www.radiolink.com
14
4.1.3 The method to set the same charging voltage and current for all ports
When charging is stopped, press SET button to enter the setting page, and then press "+/
▲
" or "-/
▼
"
button to move the blue cursor to MODE. Then press SET button to select and press "+/
▲
" or "-/
▼
"
button to select CHARGE mode. Press SET button to confirm the option. And then press "+/
▲
" or "-/
▼
" button to move the cursor to VOLTAGE, and press SET button to select and set the charging
voltage and charging current. After the setting is completed, all ports will perform in the same charging
voltage and current.
4.1.4 The method to set different charging voltage and current for each port
When charging is stopped, press SET button to enter the setting page, and then press "+/
▲
" or "-/
▼
"
button to move the blue cursor to MODE. Then press SET button to select and press "+/
▲
" or "-/
▼
"
button to select CHARGE mode. Press SET button to confirm the option. And then press "+/
▲
" or "-/
▼
" button to move the cursor to
①②③④⑤⑥⑦⑧
and press SET button to confirm. The cursor
will blink and press
"+/
▲
" or "-/
▼
" button to choose the port you want. Press SET button to confirm
and press "+/
▲
" or "-/
▼
" button to move the cursor to VOLTAGE, and press SET button to select and
set the charging voltage and charging current for the port.
Note:
Do not select all
①②③④⑤⑥⑦⑧
numbers if you want to set different charging voltage and current
for each port. If you select all of them,
①②③④⑤⑥⑦⑧
will be all in blue or green.
4.1.5 Notice of fully charging
After setting the charging current and voltage, press "START/STOP" button to start charging. The red
light on the left of the charging port will light up, and the corresponding port number will also show a
green background. The screen will display the battery charging status. The voltage and current data
lines will display the current voltage of each cell in the battery packs, the charging current, and the
battery capacity charged into it.