RadioLink BYME-A Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 18

RadioLink BYME-A Скачать руководство пользователя страница 10

RadioLink Electronic Ltd

www.radiolink.com

10

In Stabilize Mode, if the gyro phase is reversed, please adjust the gyro phase by the flight controller
Byme-A V2.0. See the below chapter for the adjustment method.

Gyro Phase Adjustment

If gyro phase is reversed, the phase needs to be adjusted by the flight controller. Press the button on the
front of the flight controller Byme-A V2.0 to change the gyro phase. The adjustment method is as follows:

Note

: Neither the always-on nor off green LED means reversed phase. Only toggle the joysticks can

check if the corresponding servo phases are reversed. If the gyro phase of the flight controller is reversed,
adjust the gyro phase by pressing the buttons on the flight controller.

Transmitter Setup

Model Type Setup

Model type needs to be set as fixed wing (Acrobasic) in the transmitter. Take RadioLink AT9S Pro
transmitter as example:

No.

Channel

If gyro phase is reversed

Indicator LED

1

AIL

Short press the button once

Green LED of CH1 on/off

2

ELEV

Short press the button twice

Green LED of CH2 on/off

3

THRO

N/A

Green LED always on

4

RUDD

Short press the button four times

Green LED of CH4 on/off

«
...
8
9
10
11
12
...
»

Содержание BYME-A



















Отзывы:

Нет отзывов