6. Secure the card’s bracket to the PC chassis by installing the screw provided with the PC.
7. Follow the PC manufacturer’s instructions while closing your PC’s enclosure.
Figure 20: Securing the Bracket to the PC Chassis
C
ONNECT ING THE
T
RAN SCEIVER
C
ABLE TO THE
PCI C
ARD
LINK
The connector at the end of the transceiver cable does not fit the jack on the Model 150 card’s
bracket.
1. Connect the connector with screws on the adapter cable to the connector at the end of the trans-
ceiver’s cable.
2. Using the adapter cable provided with the kit, attach the connnector with the locking mechanism
to the Model 150 card’s jack.
The connector only attaches to the card in one direction. As you plug the connecter into the jack,
the ends of the two levers move slightly inward, then spring outward as the connector is completely
inserted into the jack of the card. This locks the connector into the jack.
Figure 21: Connecting the Transceiver to the Adapter Card
Figure 22: The Cable Connector
I
N
S
TAL
L
ING
THE
PCI C
ARD
L
INK
™
150
AND
T
RAN
SCEIVER
S
ECT
ION
3:
16