RadioLAN BridgeLINK-Pro, Руководство по установке, Страница: 26 / 28

BridgeLINK-Pro™ Installation Guide Page 19 © 2003 - RadioLAN Marketing Group, Inc.
Test the link
Select the desired frame size that you want to use for testing purposes. Similar to a PING, adjusting the
frame size can vary test results. Enter your selection in the
Frame Size
field.
The
Estimated Distance
list allows you to choose the distance between links. Set this value on both sides of
the link. Click a value in the list to make your selection, and save the entries on the page by clicking the
Save Distance Parameter
button. This change is stored immediately, and you do not have to save changes
and reset. Using the console port, you must save changes on the
Configuration Changes
menu.
Starting and Stopping the Test Starting and Stopping the Test
Begin and end the testing at any time by clicking on the
Start
or
Stop
button. Once you have started the
test, the results are shown in the
Successful %
field. A good link should be 98% or better. The best and
worst-case scenarios appear in the
Best
and
Worst
fields.
This page also features audio output of the
Successful %
field when you place a check mark in the
Sound
check box. With the Audio feature enabled, a Professional Installer can use two walkie-talkies or a cellular
phone to adjust the antenna orientation without additional personnel.