Radiodetection RD500, Быстрый старт

Страница: 2 / 12

Introduction
About this guide
This guide provides basic operating instructions for the RD500 water pipe locator system and is intended
as a portable reference only. It also contains important safety information and guidelines. As such, it
should be read in its entirety before attempting to operate the RD500. For detailed instructions, including
the use of accessories, please refer to the RD500 operation manual which is available for download from
www.radiodetection.com
Radiodetection products, including this manual, are under continuous development. The information
contained within is accurate at time of publication; however the RD500, this manual and all its contents
are subject to change.
Radiodetection Limited reserves the right to modify the product without notice and some product changes
may have taken place after this user manual was published.
Unpacking and Set-up
Your RD500 Receiver comes packaged in a special carrying case that has compartments for the
Receiver with spike installed, a hard surface plate and the headphones. Each kit that you order is pre-
assembled and ready for use. Please keep all packaging materials in case it becomes necessary for you
to return any of your equipment. The following items should be checked as you unpack your system.
1. RECEIVER: The receiver is supplied with a 9-volt battery and ground spike installed. A hard
surface plate and headphones are also included along with this operation manual. If any items
are missing please contact your local Radiodetection office.
2. TRANSMITTER KITS: Each transmitter adapter kit comes fully assembled and ready for use. A
detailed drawing of each adapter kit is contained in this guide. If any items are missing please
contact your local Radiodetection office.