Radioddity GA-5E, Руководство пользователя

Страница: 33 / 108

30
Keep pressed the [SK1] key for 3 seconds to start the alarm tone.
The following three op � ons can be selected:
• Site: the speaker emits an alarm tone but the radio doesn’t transmit;
•
Tone:
the speaker emits an alarm tone and the radio transmits it;
• Code: the speaker emits an alarm tone and the radio transmits it followed by ANI-ID code.
(32) Scan of frequencies with CTCSS (SEEK CTC) - Menu No. 31
The func � on allows scanning the frequencies with CTCSS tone enabled.
NOTES: The func � on cannot be ac � vated when the radio is set in Channel mode. The Scan will start only when the
receiving band will detect a signal.
(33) Scan of frequencies with DCS (SEEK DCS) - Menu No. 32
This func � on allows scanning the frequencies with DCS code enabled.
NOTES: The func � on cannot be ac � vated when the radio is set in Channel mode. The Scan will start only when the
receiving band will detect a signal.
(34) Squelch tail elimina � on (TAIL) - Menu No. 33
This func � on is used eliminate squelch tail noise between handhelds that are communica � ng directly (no repeater).
Recep � on of a 55 Hz or 134.4 Hz tone burst mutes the audio long enough to prevent hearing any squelch tail noise.
(35) Squelch tail elimina � on of repeater (RP-STE) - Menu No. 34
This func � on is used when the radio operates through a repeater; when the PTT is released, the repeater will emit the end
transmission tone to con fi rm it is working.
Available se � ngs:
O ff , 1,2,3,4,5,….10 to set the delay � me.
Note: Please disable this func � on in normal using, lest a ff ect your normal conversa � on.
(36) Delay the squelch tail of repeater (RPT-RL) - Menu No.35