8
3) DTMF
Name
Setting
Description
DTMF ST
(DTMF side tone of
transmit code)
OFF
: No DTMF Side Tones are heard
Determines when DTMF side tones can be heard
from the transceiver speaker
KB Side Tone: Side Tones are heard
only from manually keyed DTMF codes
ANI Side Tone
: Side Tones are heard
only from automatically keyed DTMF
codes
KB ST+ANI ST
: All DTMF Side Tones are
heard
Save mode
OFF/Mode 1/Mode 2/Mode 3
Selects the ratio of sleep cycles to awake cycles
(Mode 1/Mode 2/Mode 3). The higher number
the longer the battery lasts. When enabled, a
word or two might be missed when the
frequency being monitored becomes active.
Scan mode
TO:
Time Operation - scanning will
resume after a fixed time has passed
Scanning Resume Method
CO
:
Carrier
Operation
-Scanning
Resume Method scanning will resume
after the signal disappears
SE
: Search Operation scanning will not
resume
PTT_ID
OFF
: No ID is sent
When to Send PTT-ID; Codes are sent during
either the beginning or end of a transmission.
BOT
: The selected S-CODE is sent at the
beginning
EOT
: The selected S-CODE is sent at the
ending
BOTH
: The selected SCODE is sent at
the beginning and ending
PTT Delay
0-30ms
Signal code sending delay
KB_LOCK
If you select this option, the keyboard is locked.
AutoLock (automatic
keypad lock)
When ON, the keypad will be locked if not used
in 8 seconds. Pressing the [#
╓
O] key for 2
seconds will unlock the keypad.
BCL(busy
channel
Lock-out)
Check
: If the channel is occupied, when you
press the [PTT] key on this channel, the radio will
make a beep tone and will not transmit any
signal.
Uncheck
: No matter if the channel is occupied,
the radio will transmit the signal when you press
the [PTT] key.
