RC188xDK
2018 Radiocrafts AS
RC188xDK User Manual (rev. 1.10)
Page 5 of 10
Radiocrafts
Embedded Wireless Solutions
Prototyping with the RC188xDB
The RC188x demonstration board is well suited for prototyping/breadboarding. With all I/O pins
easily accessible at the edge, connection to external boards can be made through board
stacking with standard pin headers or cabled with standard 2.54 mm pitch cable.
With angled header mounted on I/O connector, the demonstration board can also be mounted
vertically in other boards with 2.54mm pitch connectors.
Battery connectors on the bottom side are available for self powered demos. The demonstration
board includes an option to mount a CR2032 battery holder on the bottom side. Suggested
part:
Harwin S8211-46R, available at Digi-key part number 952-1735-2-ND or Mouser part number
855-S8211-46R. Battery clip is not default mounted.
The idea is that an external application specific circuitry/sensors etc easily can be connected
to the demonstration board as a proof of concept for the final product.
The demonstration board is built to fit a commercially off the shelf enclosure named
Router
Cube
from New Age Enclosure. Available at Mouser. The demonstration board is not delivered
with enclosure. Machining for connectors/antenna is required.
Figure 3 Optional enclosure from New Age Enclosures
