10
INSTALLATION
MOUNTING THE PHONE
You can place the TAD-727's base on a
desk or table, mount it on a standard
wall plate, or mount it directly on a wall.
Choose a location that is:
• near an AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base's location affects the hand-
set's range. If you have a choice of sev-
eral locations, try each to see which
provides the best performance.
Caution: You must use a Class
2 power source that supplies 9
volts DC and delivers at least
500 mA. Its center tip must be set to
negative and its plug must fit the TAD-
727's
DC 9V AC ADAPTER
jack. The sup-
plied RadioShack adapter was specifi-
cally designed for your TAD-727. Use
only the supplied adapter. Using an
adapter that does not meet these speci-
fications could damage the TAD-727 or
the adapter.
Notes:
• Your telephone connects directly to
a modular phone line jack. If your
phone line jack is not a modular
jack, you can update the wiring
yourself, using jacks and adapters
available from your local
RadioShack store. Or, you can let
the telephone company update the
wiring for you.
• The USOC number of the jack to be
installed is RJ11C, or RJ11W for a
wall plate jack.
On a Desk
Follow these steps when you place the
base on a desk or table.
1. Plug one end of the supplied long
modular cord into the
TEL LINE
jack
on the back of the base.
2. Plug the modular cord's other end
into a modular phone line jack.
3. Insert the supplied AC adapter's
barrel plug into the
DC 9V AC
ADAPTER
jack on the back of the
base.
!
43-727.fm Page 10 Monday, December 20, 1999 4:28 PM
