25
•
If you tried to store a frequency in a locked channel, the
scanner beeps once and
L
(next to the channel number) and
LOC
flash on the display, then the frequency flashes. To
store the frequency, either unlock the channel (see “Using
Channel Lock” on Page 30) and repeat Steps 1-4, or repeat
Steps 2-4 to select another channel and store the frequency.
Repeat Steps 2-4 to store more frequencies into channels. Or, if
you want to program the next channel in sequence, press
or
,
then repeat Steps 3-4.
Note: When you store a frequency in a channel, the scanner auto-
matically locks that channel (see “Using Channel Lock” on Page 30).
SCANNING THE STORED CHANNELS
Scanning All Channels
To begin scanning all the stored channels in your scanner, press
M.SCAN
. The scanner scans through all channels in the activated
banks which are not skipped (see “Skipping Channels” on
Page 28).
Note: Press
or
to change the scan direction.
Turning Channel-Storage Banks On and Off
You can turn each channel-storage bank on and off. When you
turn off a bank, the scanner does not scan any of the 10 channels
in that bank.
While scanning, press the number key of the bank you want to turn
on or off. If the memory bank indicator bar is on, the bank is turned
on and the scanner scans all channels within that bank that are not
skipped. If the indicator is off, the scanner does not scan any of
the channels within that bank.
20-561.fm Page 25 Wednesday, August 4, 1999 3:48 PM