24
B
as
ic
O
pe
ra
ti
on
25
B
as
ic
O
pe
ra
tio
n
• If you select an entire grouping, you may have an excessively
large number of objects imported to a playlist, so be sure you
want to monitor everything that a grouping contains. iSCAN only
monitors one transmission at a time, and trying to scan too many
objects may be slow if they are frequently busy.
Importing Trunked Systems
The same three programming steps are followed for importing
trunked systems, except that during step
, one or more sites must be also be selected along
with any individual talkgroup objects.
1.
Scroll to the
Systems
data
type (either under the
States
or
Counties/Cities
level) and
press
.
n
Note:
Not all states have a
Systems data type.
T a r r a n t
d a t a t y p e s :
A g e n c i e s
C a t e g o r i e s
S y s t e m s
2.
Scroll to the system you are
interested in and press
.
S e l e c t S y s t e m
i n c o u n t y :
D F W C o m m u n i c a t
U n i t e d P a r c e l
O n c o r E n e r g y
D F W A i r p o r t P u
3.
Scroll to
Sites
. You have a few
options for selecting sites:
•
Press
/II/SEL
to select all
sites. A appears next to
Sites.
When scanning,
iSCAN
will automatically use the best
available site.
S y s t e m S i t e s
a n d C a t e g o r i e s :
S i t e s
C a t e g o r i e s
-or-
•
Press
to see a list of
available sites.
•
If only one site is listed,
press
/II/SEL
to select it.
•
If more than one site is
listed, press
/II/SEL
to
place checkmarks next to
the sites closest to your
location.
S y s t e m S i t e s
C e d a r H i l l
D a l l a s
F o r t W o r t h
R i c h a r d s o n
G r a p e v i n e
4.
Scroll back to
Categories
to
select your talkgroups. You
can either:
•
Press
/II/SEL
to select all
talkgroups in the category. A
appears next to the category
-or-
•
Press
to see a list of
available talkgroups. Drill
into the listed talkgroups
and press
/II/SEL
to select
the talkgroups you want to
monitor.
C a t e g o r i e s
i n S y s t e m :
F o r t H o o d ( U S
O n c o r E l e c t r i c
T a l k g r o u p s
i n C a t e g o r y :
O n c o r D i s p a t c h
F B - D I S T
O n c o r D i s p a t c h
O n c o r D i s p a t c h
5.
Follow the steps in
Import Objects to Playlists” on page 23
to
import your trunked system to a playlist.
n
Notes:
• You can also select the entire system and iSCAN will monitor
all talkgroups and automatically use the best available site.
However, this could result in an excessively large number of
objects imported to a playlist, which can slow your scanning time
with unwanted talkgroups.
• Talkgroups will not be imported to a playlist unless one or more
sites in the system are also selected.
