background image

Dodge Raminator
Monster Truck

60-4357

Installing Batteries

You will need...

One 9V battery for the transmitter (not included)
One 7.2V battery pack for the Dodge Raminator (not included)  

Put Battery in the Truck

• Turn the truck off.
• Lift the two latches on the back of the truck to 

open the battery compartment cover.

• Attach the battery pack’s connector to the 

vehicle’s connector. Do not force them 
together. They fit one way only. Place the 
connectors in the space inside the compart-
ment and place the battery pack in the com-
partment. Be sure the wires do not touch any 
moving parts.

• Replace the cover and secure the tabs.

Put Battery in the Transmitter

• Press OPEN on the battery compartment cover and slide 

it off.

• Insert one 9V battery in the battery compartment, match-

ing the polarity symbols (+ and -) as marked inside.

• Replace the cover and snap it on.

Driving the Dodge 
Raminator

• Turn the Dodge 

Raminator on. The 
headlights illuminate

• Use the transmitter’s 

controls to drive and 
steer the truck.

• When you finish driving 

the vehicle, turn the 
transmitter and vehicle 
off.

Step One

Step Three

Battery Pack Connector

• Push to the left to turn left.
• Push to the right to turn right.
• Release to go straight.

Right Control Lever

Str
aight

Left

  

Right

 

  

What’s Included

Dodge Raminator    Plastic Antenna Tube

Transmitter

Box Wrench    Owner’s Manual

Step Two

Installing the Antenna Tube

Route the antenna wire’s loose end through the supplied plastic tube and insert the tube 
securely into the truck’s antenna tube holder.

• Push forward to move forward. For turbo speed, push forward and to the right.
• Pull backward to move backward.
• Release to stop.

Left Control Lever

Stop

Reverse

Forward

Отзывы: