11
Installation
Ring Type B High
, or
Ring Type B
Low
.
TURNING AUTO TALK ON/
OFF
Your phone is preset so you must press
TALK
when you lift the handset from the base
to answer a call. With Auto Talk turned on,
you can answer a call by just lifting the hand-
set from the base. If the handset is away
from the base, you can answer by pressing
any key.
Follow these steps to turn Auto Talk on or
off.
1. Lift the handset and hold down
CALL ID
until the menu appears with
Auto
Talk
selected.
2. Press
SELECT
to change the Auto Talk
setting.
On
or
Off
appears indicating
the selected setting.
3. Return the handset to the base (or press
CALL ID
) to store the new setting.
TURNING CALLER ID/CALL
WAITING ON/OFF
If you subscribe to Call Waiting with Caller ID
service, you can set the phone to show Call-
er ID information for an incoming call even
while you are using the phone.
Follow these steps to turn the Caller ID/Call
Waiting feature on or off.
1. Lift the handset and hold down
CALL ID
until the menu appears with
Auto
Talk
selected.
2. Press
2
or
9
9
9
9
to move the cursor to
CIDCW:
(Caller ID/Call Waiting).
3. Press
SELECT
to turn the Caller ID/Call
Waiting setting on or off.
On
or
Off
appears indicating the selected setting.
4. Return the handset to the base to store
the new setting.
STORING YOUR AREA
CODE
You can store your local area code in the
phone’s memory so it will not store the area
code if you receive a local call. If you need to
add or store the area code for a local num-
ber, you can add it afterwards (see “Adding/
Deleting the Area Code” on Page 17).
Important: In some areas, the area code is
necessary even for a local call. If you live in
such an area, do not store the area code.
Follow these steps to store your area code.
1. Lift the handset and hold down
CALL ID
until the menu appears with
Auto
Talk
selected.
2. Press
3
or
9
9
9
9
to move the cursor to
Area Code:
.
3. Press
SELECT
, then enter your three-
digit area code. If you make a mistake,
repeatedly press
6
6
6
6
or
7
7
7
7
to move the
cursor over the incorrect digit, then enter
the correct number.
Note: If an area code is already stored,
it appears on the display after you hold
down
CALL ID
. Press
DELETE
three
times to delete the area code. Then
enter your area code.
4. Press
SELECT
to store the area code,
then press
CALL ID
or return the handset
to the base to clear the display.
43-1122.C.fm Page 11 Wednesday, December 13, 2000 1:56 PM