Need help? Call 1-800-955-2599
2
INTRODUCTION
Your RadioShack 3 in 1 Easy Remote can re-
place up to three standard infrared remote con-
trols.
Unlike some universal remote controls, the 3 in 1
is
preprogrammed
and does not have to learn its
commands from the original remote controls. All
you have to do is tell the 3 in 1 which remote con-
trols you want it to replace.
After you’ve entered the manufacturers’ codes for
your original remotes, the 3 in 1 is automatically
ready to operate most of the same functions as
the original remotes. (This manual includes a list
of manufacturers’ codes for TVs, VCRs, and ca-
ble converters.)
Your 3 in 1 remote has these features:
Replaces Other Remotes — lets you replace up
to three remote controls with one easy-to-use re-
mote control.
Powerful Infrared Beam — in many cases, lets
you operate your remote-controlled devices from
a greater distance than with the original remote
controls.
Convenient Keypad Design — places each
control key in the best position for easy operation.
Handy Reference Label — provides a conve-
nient place for you to write down the manufactur-
ers’ codes.
Toll Free Support — you can get expert help for
your 3 in 1 by calling 1-800-955-2599.
Note: You need two AAA batteries (not supplied)
to operate your 3 in 1 remote.
©
1997 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by
Tandy Corporation
15-1916b.fm Page 2 Monday, July 19, 1999 12:17 PM