1. OPERATION
1-49
1.33
How to Program Function Keys (F1 and F2)
You can program function keys (
F1
and
F2
) to provide one-touch access to a required
function. To activate a function, press the applicable function key,
F1
or
F2
. The de-
fault program for the
F1
and
F2
keys are [ORIENTATION MODE] and [DOCKING] re-
spectively.
How to program a function key
1. Open [MAIN MENU], click [CONFIGURATION].
2. Click [FUNCTION KEY].
3. Click the function key ([F1] or [F2]) to program.
4. Click the appropriate program category. The options for each category are shown
on the below and on the next page. Some items have multilevel options.
• Programs available in the [ECHO] menu
• Programs available in the [STD KEY] menu
• Programs available in the [TT
.
AIS] menu
[F1]
1 BACK
2 [ECHO]
3 [STD
KEY]
4 [TT•AIS]
5 [OPERATION]
6 [BRILL]
7 [CUSTOM]
1 BACK
2 CUSTOM-MENU/
FTC/
IR/
ES/
EAV/
ANT
SELECT/
AUTO-GAIN/
AUTO-STC/
AUTO-RAIN/
TUNE
SELECT/
TRAIL
DISPLAY/
TRAIL
TIME/
TRAIL
T/R/
WIPER
[F1-ECHO]
1 BACK
2 ALARM
ACK/
EBL
OFFSET/
OPERATION
MODE/
ORIENTATION-MODE/
CU-TM
RESET/**
VECTOR
TIME/
VECTOR
MODE/
TT-LIST/**
AIS-LIST/
BRILL-MENU/
MARK/*
CAPTURE
[F1-STD
KEY]
*: [RIVER] mode only
**: [SEA] mode only
[F1-TT•AIS]
1 BACK
2 TT-DISP/**
AIS-DISP/
PAST POSN INTERVAL/
REF
MARK/**
CPA
LIMIT/
CPA/
TCPA/
AZ1/**
AZ2/**
AIS SCALED SYMBOL
**: [SEA] mode only
