Digital BUS-WATCH
®
R1001 / R4001
Security Cabinet Mount Conversion
TOP
SLOTS FACE
OUTWARD
BOTTOM
Figure 22: Security Cabinet Mount Conversion
To change the protective enclosure from Hanging Mount to Floor Mount,
remove the 8 thread protection caps from the bottom side of the Security Cabinet.
Next, reverse the placement of the slide rails and screws from top to bottom of the
Digital BUS-WATCH® Security Cabinet. Put the 8 thread protection caps into
the 8 holes on top of the enclosure.
Page 32 of 96
Radio Engineering Industries, Inc.
640370 -- Rev 0 -- 8/17/2007