5 Years
Extruded Silicone
90+
67
CAUTION - light fitting must be installed by a licensed electrician.
•
Please ensure to read instructions correctly for the installation of the fitting provided. Failure to do so will result in a void of warranty and
compromises the safety of luminaire.
•
Radiant Lighting are not liable for warranties when luminaire is damaged by incorrect installation. The installation of the luminaires must be
in accordance with the national safety regulations.
Please refer to Radiant Lighting’s General Terms & Conditions for more information concerning the installation and warranty of our products.
Category
Power
IP Rating
For all other queries, please call us on
1300 438 609
FLOW TOP
- Flow Top can only be bent upwards & downwards. Make sure that this predetermined bending direction is never changed.
- Handle with care.
- Flow Top may not be modified or converted otherwise than prescribed.
5W / 10W
LED Strip Lighting
- Do not bend sharply or too tight. Maximum bending diameter is 240mm.
LIGHT SOURCE
LIGHT SOURCE
Bending Diameter
240mm
- Do not droop.
- Do not hang.
- Do not twist.
5
CRI
92+
LED
IP
6
7
DIMMABLE
SDCM
≥
2
120°
24V
DC
