www.rad
ialeng
.com
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada
Tel: 604-942-1001 • Fax: 604-942-1010
email: [email protected]
True to the Music
Radial ProRMP users guide v1.2 - Part #: R870 1180 00 / 10-2021
Subject to change without notice
ProRMP User Guide
Radial Engineering
LIMITED THREE YEAR TRANSFERABLE WARRANTY
Radial Engineering Ltd. (“Radial”) warrants this product to be free from defects in material and
workmanship and will remedy any such defects free of charge according to the terms of this
warranty. Radial Engineering will repair or replace at its option any defective component(s)
of this product, excluding the fi nish, the footswitch (footswitch is warranted for 90 days)
and wear and tear from normal use, for a period of three (3) years from the original date of
purchase. In the event that a particular product is no longer available, Radial Engineering
reserves the right to replace the product with a similar product of equal or greater value. To
make a request or claim under this limited warranty, the product must be returned prepaid
in the original shipping container (or equivalent) to Radial Engineering or to an authorized
repair centre and you must assume the risk of loss or damage. A copy of the original invoice
showing date of purchase and the dealer name must accompany any request for work to
be performed under this limited warranty. This limited warranty shall not apply if the product
has been damaged due to abuse, misuse, misapplication, accident or as a result of service
or modifi cation by any other than an authorized repair centre.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE
HEREOF AND DESCRIBED ABOVE. NO WARRANTIES, WHETHER EXPRESSED
OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL EXTEND
BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE OF THREE
YEARS.
RADIAL ENGINEERING SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE
OF THIS PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY DEPENDING ON WHERE
YOU LIVE.
ProRMP User Guide
Radial Engineering
1
2
3
4
INPUT
Balanced low-Z XLR input jack,
+4dB line-level, 600-ohm. The
XLR female connector is wired
with Pin 2 hot following the AES
standard.
GROUND LIFT
Disconnects pin 1 at the XLR
input and interrupts the ground
path between the recorder and
the ProRMP ¼” output. The
ProRMP must be connected to
a properly grounded amp to use
the LIFT switch.
BOOKEND DESIGN
14 gauge steel outer shell
creates protected zone around
connectors and switches.
7
6
5
I-BEAM CONSTRUCTION
Welded internal enclosure features
ultra rigid I-beam construction to
protect the PC board.
OUTPUT
Hi-Z ¼” output connects to guitar
amp or effect pedal input. This
output provides the primary
ground path for the ProRMP. This
output should be connected to a
properly grounded amplifi er.
LEVEL
The output LEVEL control sets
the level going to the guitar
amplifi er. This recessed control is
adjusted using a guitar pick as a
screwdriver.
FULL-BOTTOM NO-SLIP PAD
This provides mechanical isolation
to reduce slipping and electrical
isolation from amplifier frames
and handles.
FEATURES AND FUNCTIONS
1
True to the Music
CAUTION: PLEASE READ THE IMPORTANT NOTICE ON
THE BACK COVER BEFORE USING THE ProRMP
2
5
6
3
4
7
IMPORTANT NOTICE!
The Radial ProRMP is a passive re-amper specifi cally designed for use with ampli-
fi ers with proper electrical safety grounds approved by nationally recognized elec-
trical authorities such as UL in the United States, CSA in Canada and other similar
bodies in countries around the world.
It is further understood that due to the unpredictable nature of connecting any
number of diff erent amplifi ers and pedals together, using the ProRMP can pose a
potential for electric shock, and as such, the user is completely responsible for any
and all consequences as these are beyond our control.
This means that you are completely responsible to ensure the safe and proper use
of the ProRMP and to clearly understand that using it confi rms you have taken full
responsibility. If you are not 100% sure of your actions, please consult a qualifi ed
technician for advice before using this device or connecting any of your equipment
to it.
ProRMP Re-amper
Owner’s Manual
®
®
