7
1784242 Rev F
ECO 18-0034
July 2018
www.radiaproducts.com (PHONE) 800-221-1083 | (INTL) +1-763-533-2969 | (FAX) 763-533-0015
Owner’s Manual:
5315-X1
WARNING!
Be sure that the remote power switch is installed by a qualified electrician. Refer to local
codes for proper placement of the remote power switch.
IMPORTANT:
Before attempting to operate the machine:
1. Open the door and locate the shipping block and rope assembly. Remove the pin as shown by
lifting straight up.
2. Remove the block by sliding outwards. Repeat steps 1 and 2 for the other side
3. Discard or store the shipping blocks and rope assemblies.
4. Set the machine on a stable, level surface.
NOTE:
If the machine needs to be shipped any time, contact Radia Products to obtain the
appropriate instruction sheet, part no. 1785025 and shipping block assembly, part no. 9784291. See
section 9, Ordering, for ordering information.
Step 1
Step 3
Step 2
3. Unpacking & Installation