45
EN
13. Manual operation
Example for manual control of a roller shutter
1.
Open the roller shutter.
Pressing the button briefly causes the roller
shutter to move to the upper end point.
2.
/
or
causes the roller shutter to stop in the interim.
3.
Close the roller shutter.
The roller shutter moves to the configured
ventilation position
or to the lower end
point.
Manual operation is possible from the standard display at any time and
has priority over the programmed automatic functions.
Ventilation position, see page 84
If the ventilation position is configured, the roller shutter will first roll
down to this position. Pressing the
[ Down ]
button once more causes
the roller shutter to continue downwards.