116
EN
28.3 Menu 9.9.3 - Setting the solar mode
If you use external sun sensors (e.g. the DuoFern Sun Sensor or the
DuoFern Environmental Sensor in conjunction with the HomePilot®)
or the Troll Comfort DuoFern itself as a central sun controller for other
DuoFern devices, you can use this function to determine how the Troll
Comfort DuoFern should react.
The following solar modes can be selected:
[ 1 ] = Local light sensor (factory setting)
[ 2 ] = Transmitter (local light sensor and transmitter function)
[ 3 ] = Receiver (external sun sensor)
Mode [ 1 ] - Local light sensor *
Select mode [ 1 ] if ...
◆
...the Troll Comfort DuoFern is to be controlled by a light sensor
connected to this device. Function and settings of mode
[ 1 ]
from
page 69.
Mode [ 2 ] - Transmitter (local light sensor and transmitter function) *
Select mode [ 2 ] if ...
◆
...the Troll Comfort DuoFern and other logged-on DuoFern devices
are to be controlled by a light sensor connected to the Troll device.
Mode [ 3 ] - Receiver (external sun sensor)
Select mode [ 3 ] if ...
◆
...the Troll Comfort DuoFern is to be controlled by an external sun
sensor or a central sun controller.
*
No signals are executed from an external sun sensor or central sun
controller in modes
[ 1 ]
and
[ 2 ]
.
