23
EN
11.2 Logging off DuoFern transmitters
1.
+
Activate logout mode.
Simultaneously press and hold the buttons for
approx. 4 seconds.
The timer LED flashes
red
:
Logout mode remains active for approx.
120 seconds
.
2.
Switch the desired DuoFern transmitter to logout mode.
3.
Pay attention to the timer LED.
flashes red
Logout mode is active.
green (for 5 seconds)
Log off was successful. Afterwards, the LED will light up red
again, if the automatic timer has been activated.
red
The logout process failed,
for example if:
◆
An attempt was made to log-off a DuoFern transmitter
that is not logged-on.
4.
Log the next DuoFern transmitter on / off. In order to do so, repeat steps 1 to 2.
5.
Cancel the logout process.
You can cancel the logout process at any time by briefly
pressing the
[ SET/Stopp ]
key.
