18
i
EN
8. Assembly
The
Troll Basic DuoFern
is designed for flush-mounted installation. For this, you require a
58mm flush-mounted box
. We recommend using a deep box.
Installation procedure:
1.
Switch off the mains.
2.
Make the electrical connection according to the wiring diagram (see page 17).
3.
Route the power cables to the flush-mounted box.
4.
Slide the installation housing
[ 3 ]
into the flush-mounted box and clamp the claws
[ 5 ]
in
place with the screws provided.
5.
Fit the frame
[ 2 ]
.
6.
Carefully insert the operating unit
[ 1 ]
into the installation housing
[ 3 ]
.
7.
Switch the mains power back on again.
[ 1 ]
[ 2 ]
[ 3 ]
[ 5 ]
Connecting terminals on bottom >
[ 4 ]
