RADEMACHER RolloTron Swivel Winder Comfort 1500, Руководство по эксплуатации и сборке

Страница: 51 / 60

51
EN
20. What to do if... ?
Fault Possible cause / solution
... the RolloTron Swivel Winder Comfort indicates
no functions? Check the power supply incl. connecting cable and plug.
... the RolloTron Swivel Winder Comfort fails to
react at the configured switching time? a) There may have been a power failure, see page 17. Reset the time
and date with the help of the installation wizard, see page 32.
b) The automatic mode may have been deactivated. Switch the
automatic mode on, see page 37.
... the roller shutters no longer stop at the configured
end points? The end points may be displaced due to elongation of the belt. Re-
adjust the end points, see page 45.
... the roller shutters stop as soon as the operating
button is released? During initial installation or after a reset, the will be no end points
set. In this case, you will need to reset the end points with the help
of the installation wizard, see page 31.
... the RolloTron Swivel Winder Comfort rotates in
the wrong direction? Possibly the belt is wrapped around the reel incorrectly, see
page 27.
... the roller shutters stop suddenly during upward
travel? a) The drive may be jammed, for example, due to the roller shutters
freezing up or other obstacles.
b) The roller shutters may not be running sufficiently smoothly.
Check the roller shutters and roller shutter guides.
c) The roller shutters may be too heavy. The maximum tractive force
of the belt winder has been exceeded, see page 54.
i