manualshive.com logo in svg

RADEMACHER RolloTron Swivel Winder Comfort 1500, Руководство по эксплуатации и сборке

Поделиться
Скачать
RADEMACHER RolloTron Swivel Winder Comfort 1500 Скачать руководство пользователя страница 24

24

EN

10.  Mounting the wall bracket

i

Note for mounting on window frames, etc.

Weak window frames may break.

 

◆

When mounting on window frames, please check 
their structure and load capacity. Especially when 
mounting onto designs made of synthetic materials, 
the fastening screws must be screwed tight and must 
not loosen during operation.

 

◆

If required, ask your window manufacturer before 
fastening the belt winder onto a window frame made 
of synthetic materials.

1. 

Use the provided mounting holes.
Two mounting holes are required to fasten the belt wind-
er. Generally, it is possible to use the existing mounting 
holes of the old belt winder to screw the wall brackets 
in place.

3. 

Drill mounting holes (only required for wall mounting).
Drill the mounting holes with a 6 mm masonry drilling 
machine and place the provided wall plugs into the 
drilled holes.

2. 

Draw on the new mounting holes.

Hold the wall bracket onto the 
desired installation position 
and draw on both mounting 
holes if new mounting holes 
need to be drilled.

Содержание RolloTron Swivel Winder Comfort 1500





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды