51
EN
+ -
+ -
+ -
16.2 Switching times (opening and closing times) [ / ]; brief description
◆
SENSOR (only for closing times [ ] )
The closing time is controlled by a light sensor in
relation to the level of brightness.
In addition, the measured twilight value is linked to
the previously configured closing time. The config-
ured closing time is interpreted as
"latest at xx:xx
hours"
.
1.
Call up the main menu.
16.2.1 Menu 2 - Configuration of opening and closing times [ / ]
2.
Select and open menu
2
[ ]
Switching times
.
3.
Activate and confirm the
switching times.
On
= Switching times on
OFF
= Switching times off
4.
Select and confirm a
switching time block
.
If the function is not acti-
vated, proceed at
point 5
.
1
= The switching time
setting is realised with
a
switching time
mode
.
2
= The switching time
setting is realised
without
a
switching
time mode
.
●
Example a:
– In winter dusk begins, for example, at approx.
17:00 hours.
– The closing time has been set to 20:00 hours.
– Your roller shutters will close at 17:00 hours.
●
Example b:
– In summer dusk begins, for example, at approx.
22:00 hours.
– The closing time has been set to 20:00 hours.
– Your roller shutters will close at 20:00 hours.
