30
EN
13.1 Logging on devices
1.
If the display is off, turn it on by pressing any button.
2.
M
>
/
Select menu 9.
3.
OK
Open menu 9.
The number of logged-on
DuoFern devices is dis-
played.
4.
Switch the desired DuoFern device to
log-on mode.
5.
Start the log-on process on the DuoFern Sun/
Wind Sensor.
The log-on process remains active for a
maximum of 2 minutes.
5.1
After successfully logging
on, the number of logged-
on DuoFern devices is
updated on the display.
6.
OK
or
M
the log-on process is terminated after success-
fully logging on or by pressing the button.
Continue, see next page.
i