manualshive.com logo in svg

RADEMACHER 3650 00 12, Инструкция по электрическому подключению и пусконаладке

Поделиться
Скачать
RADEMACHER 3650 00 12 Скачать руководство пользователя страница 91

91

EN

26.1    Menu 9.8.1 - Switching the automatic summer/ 

 

winter time on/off

The Troll Comfort and Troll Comfort 3D feature an automatic 
summer/winter changeover function.

Summer time

The timer is changed to summer time on the last Sunday in March. The 
timer is set back one hour at 02:00 hours. 

Winter time

The timer is changed to winter time (standard time) on the last Sunday 
in October. The timer is set back one hour at 03:00 hours.

Recommendation for operating the device outside Germany

If the Troll Comfort or Troll Comfort 3D are not being used in Germany, it 
may be necessary to switch off the automatic summer/winter changeo-
ver function.

1. 

  Open menu 

9.8.1

.

2. 

  Activate or deactivate the summer/winter 

 

changeover function and confirm. 

On = function on
Off = function off

Содержание 3650 00 12

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды