80
EN
25.3 Menu 9.3 - Configuring the ventilation position
If you do not want the roller shutter to close fully to the lower end point,
you can use this function to configure an arbitrary position
(
e.g. as the ventilation position
)
.
When closing automatically, the roller shutter stops at the ventilation
position, but it can subsequently be fully closed manually.
i
The run time must be configured prior to setting the venti-
lation position, see page 78.
1.
Open menu
9.3
.
2.
Activate / deactivate the ventilation position
and confirm.
On = ventilation position on *
Off = ventilation position off **
* After activation, the current
ventilation position appears.
** After deactivation, the display jumps back
to the menu.
3.
First fully open the
roller shutter.
Содержание 3650 00 12
Страница 111: ...111 EN i ...
