44
EN
14. Moving to a target position
If necessary, you can enter an arbitrary target position for your roller
shutter which you can then move to directly. Moving to the target posi-
tion and stopping the roller shutter is done automatically.
Automatic movement after approx. two seconds
The device will initiate movement to the configured target position
automatically if no button is pressed for approx. two seconds.
i
In order to use this function, it is necessary to previously
determine and configure the
run time
for the connected
tubular motor, see page 78.
The ventilation position is ignored when moving to the
target position.
1.
/
Display the current position of the roller shutter
by briefly pressing one of the buttons.
The current position is given as a
percentage
[ %
]
.
2.
/
Enter the desired target position (e.g. 20 %) by
repeatedly pressing the button.
The arrows
[
/
]
show the resulting direction
of travel.
Value = roller shutter position
0 %
= fully open
100 %
= fully closed
3.
The roller shutter will automatically move to the target position and
stop after approx. two seconds.
Содержание 3650 00 12
Страница 111: ...111 EN i ...
