28
i
EN
15.1 Manual operation - jog mode
As soon as jog mode is activated, it is possible to manually operate the DuoFern HomeTimer in
jog mode. Jog mode provides a convenient way to configure Venetian blinds.
Pressing the respective operating key
[ up / down ]
for an extended period causes the DuoFern
HomeTimer to automatically move the Venetian blinds to the corresponding end position.
Example for manual control of Venetian blinds in jog mode.
1.
/
>
Select and confirm the desired DuoFern actuator
or
[ ALLE] (ALL)
.
2.
Press briefly
The Venetian blinds move upwards briefly.
or
2.1.
Press
The Venetian blinds open.
The Venetian blinds move up to the upper end point.
3.
The Venetian blinds to stop in the interim.
4.
Press briefly
The Venetian blinds move downwards briefly.
or
4.1.
Press
The Venetian blinds close.
The Venetian blinds move to the configured
ventilation
position
or to the lower end point.
Ventilation position, see page 54
If the ventilation position is configured, the roller shutters will first roll down to this position.
Pressing the
[ Down ]
key once more causes the roller shutters to continue downwards.
Содержание 3250 13 71
Страница 70: ...70 EN ...
Страница 71: ...71 EN ...
