KTM 690 & Husqvarna 701 F4 fairing Installation Manual
Thank you for purchasing the KTM 790/Husqvarna 701 F4 fairing kit from RADE/GARAGE. The
installation is full bolt on, not difficult but may take full afternoon including all preparations.
The installation is the same for KTM 690 2019+ and for Husqvarna 701 2020+ so we use one set of
pictures. Only the side fairings are different for nice fit with the bike itself.
1/ Remove the OEM mask
a/ First take out the hose from the plastic guide on the left side (in the direction of the motorbike)
b/ The mask holds on torx bolts. Remove them and take out the mask
c/ disconnect the headlights connector