Raddy RF760, Руководство по эксплуатации

Страница: 17 / 64

RF760 Full-Band Radio
15
14.2 FM receiving state:
Note: In the United States, Canada, Mexico and other North and
South American countries, the middle wave step value is set to
10 kHz (or 5 kHz). In other countries, the middle wave step value
is 9 kHz (3 kHz).
After the selection, short press [SET] to confirm the selected step
value. If you do not operate it within 5 seconds, 9kHz/10kHz will
exit and the final settings will be defaulted.
14.1.3 Short press [SET] for the third time to enter ATT. (LOCAL)
or (NORMAL) of ATT starts flashing. Then short press [SET] to
select (NORMAL) or (LOCAL) settings. Then press [SET] for
confirmation, and (LOCAL) or (NORMAL) of ATT stop flashing. It
may exit (DX) or (LOCAL) to switch operations and default the
current setting if there is no operation within five seconds.
14.2.1 Short press [SET] once. When the number of bandwidth
(BW) flashes, short press [MODE] to SET the bandwidth to be
40KHz, 110KHz, 84KHz and 60KHz.
In the FM mode, the bandwidth should be 40 kHz for monophonic
and 60 kHz for stereo in the US.
14.2.2 Short press [SET] for the second time. When the FM point
flashes, short press [MODE] key.
LCD displays 64.00MHZ, 76.00MHZ and 87.50MHZ.
When 64.00MHz is displayed, it means that the FM receiving
range at this time is 64.00-108.00MHz.
When 76.00MHz is displayed, it means that the FM receiving
range at this time is 76.00-108.00MHz
When 87.50MHz is displayed, it means the FM receiving range is
87.50-108.00MHz at this time.
Band switching selection; press [SET] key and FM frequency stop
flashing; FM band will exit if there is no operation within 5
seconds. The default work is the current setting.