57
12. Multi-profiles operations
Several tasks of multi-profiles operations are extracted to the row of “wizards”,
which can be found in menu
File
. Wizard in the "
Prism2
" Software, is the sequential row
of functions and procedures with possibility to navigate from the first step to the final one
using buttons
< Back
and
Next >
.
Note: Profiles added to any wizard have to have the same number of samples and
equal time ranges.
12.1. Profiles combining wizard
There is a possibility to join several profiles to the single one using
Profiles
Combining Wizard
(menu
File / Profiles Combining
). The wizard’s output is the single
file stored on the hard drive.
Fig.12.1. Profiles combining wizard dialog box on the 1
st
step.
User can add profiles from the hard drive pressing button
Add…
on the 1
st
step.
Profiles could be added one-by-one or several profiles at once pressing
Ctrl / Shift
key in
the open file dialog box. The joining order corresponds to the profiles order in the list, if
you want to move up or down any profile in the order, select it and press correponding
button:
- to move up or
- to move down. Any unnecessary profile could be
removed pressing button
Remove…
If you need to clear the list – press button
Remove
all
.
Note: "
Prism2
"
Softwareis is a 32-bit application and has limited amount of the
operation memory (2 GB), provided by the operation software, what occupies opened
profiles and its Undo/Redo points. Processing and operation speed depends on the size of
