RACOM RipEX2, Руководство пользователя

Страница: 119 / 248

Cost
Number {0 – 2
32
-1}, default = 10The cost of connection to this neighbor. The higher the number
the higher the cost. It enables to make decisions inside the router between multiple paths from the
same neighbor.
Next hop self
List box {Off; Always; Internal; External}, default = "Off"Defines it the exported routing rules should
have ‘next hop’ addresses overwritten to the address of this router. "Internal" overwrites only the
rules from the local AS. "External" overwrites only the rules from the other AS.
7.2.4.4. Static rules
Pre-defined static routing rules to be exported over the BGP protocol. Maximum number of rules is
256.
Active
List box {On; Off}, default = "Off"Enables / disables the static routing rule.
Destination IP / Destination mask
IP address, default = 0.0.0.0/32IP address and mask defining the exported routing rule destination
address range.
Note
Informational note.
7.2.4.5. Import IGP filter
Import IGP filter [PP1] rules. The order of rules matters. Maximum number of filter rules is 256.
Filter policy
List box {Accept; Reject}, default = "Reject"Defines what action is taken on the routing rules which
were not captured (i.e. fallback) in the
Import IGP filter .
Active
List box {On; Off}, default = "On"Enables / disables the filter rule.
Note
Informational note.
Filter network
List box {Off; Match; Not match}, default = "Off"Selects a method of the routing rule destination
range comparison.
Network IP / Network mask
IP address, default = 0.0.0.0/0IP address and mask defines the network prefix to be compared
Mask from
Number {0 – 32}, default = 0
Mask to
Number {0 – 32}, default = 32Definition of the enabled range of the mask length of the processed
routing rule.
119 © RACOM s.r.o. – RipEX2 Radio modem & Router
Settings