RACOM RipEX2, Руководство пользователя

Страница: 106 / 248

Enables / disables the static routing rule.
Destination IP / Destination mask
IP address, default = 0.0.0.0/0
IP address and mask defining the exported routing rule address range.
Metric
Number {0 – 65534}, default = 0
Routing rule metric value. The higher the value, the more “expensive” the path is.
Note
Informational note.
7.2.2.5. Import filter
BABEL import filter rules. The order of rules matters. Each incoming routing rule is processed by those
Import filters. Maximum number of filter rules is 256.
Active
List box {On; Off}, default = "On"
Enables / disables the filter rule.
Filter network
List box {Off; Match; Not match}, default = "Off"
Method of the routing rule target range comparison.
Network IP / Network mask
IP address and mask defining the network range to be compared.
Mask from
Number {0 – 32}, default = 0
Mask to
Number {0 – 32}, default = 32
Definition of the enabled range of the mask length of the processed routing rule.
Examples:
Rule 0.0.0.0/0{0,32} captures all IP ranges
RipEX2 Radio modem & Router – © RACOM s.r.o. 106
Settings