manualshive.com logo in svg

RACOM RAy3-11, Руководство пользователя, Страница: 230 / 241

Поделиться
Скачать
RACOM RAy3-11 Скачать руководство пользователя страница 230

10.7. Declarations of Conformity

10.7.1. RED Declarations of Conformity

EU DECLARATION OF CONFORMITY

ver. 2.0

www.racom.eu

 

 

 

Mirova 1283, 592 31 Nove Mesto na Morave, Czech Republic 

 

 

 

RAy3-18

Manufacturer   

RACOM s.r.o.

Radio equipment type 

RAy3-10

 

 

Safety   

 

EN 62368-1:2020+A11:2020

 

 

 

 

 

EN 301 489-3 V2.1.1

 

 

EMC 

 

 

EN 301 489-1 V2.2.3

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The radio equipment described above is in conformity with the Directive 2014/53/EU of the European 
Parliament and of the Council on the harmonisation of the laws of the Member States relating to the 
making available on the market of radio equipment and repealing Directive 1999/5/EC.

Harmonised standards used for demonstration of conformity:

 

 

Spectrum 

 

EN 302 217-2 V3.1.1  

 

 

 

 

 

EN 301 489-4 V3.3.1

Signed for and on behalf of the manufacturer:

th

Nove Mesto na Morave, 14  of June 2022
Jiri Hruska, CEO

Radio SW version

1.0.2

RACOM s.r.o.

| Mirova 1283   |

592 31 Nove Mesto na Morave | Czech Republic

Tel.: +420 722 937 522 |  E

   -mail: [email protected]

Fig. 10.2: RED Declaration of Conformity for RAy3-10 and RAy3-18

RAy3 Microwave Link – © RACOM s.r.o.

230

Safety, regulations, warranty

Содержание RAy3-11


















































































































































































































































Отзывы:

Нет отзывов