RACOM PROFI MX160, Руководство по эксплуатации

Страница: 17 / 28

Fig. 3.9: GPS modul on 2
nd
slot of MR400 modem
Tab. 3.10: GPS module parameters
16 channel, L1 frequency, C/A code Receiver type
max. 4 times a sec., typiccally 1 s Location data updating
position 2,5 m, SBAS 2,0 m Accuracy
hot start < 3,5 s Start-up times
warm start 33 s
cold start 34 s
aided start 5 s
RMS 50 ns, 99 % < 100 ns Timing accuracy
NMEA Protocol
< 20 mA including antenna Power consumption (for 3 V)
9 600 bps Signalling rate of module (
SPe
menu)
Note
The communication protocol, data rate, period of time pulses, and other parameters can be
configured in software, see „MORSE firmware dokumentation
3
“
3.7. T-port
(Ethernet to serial)
Use
The Ethernet interface is mounted with a standard RJ45/STP connector. This interface is an Ethernet
(TCP, UDP) to RS232 serial interface converter.
The module automatically set communication to a speed of 10 or 100 Mbit/s according to the speed of
the network to which it is connected.
3
https://www.racom.eu/eng/support/firmware/mr400/index.html
17 © RACOM s.r.o. – Wideband modems – PROFI MX160
Connectors