Installation Instructions (4Post)
Page 3
Step 3.
Attach Cable Management: Cable Management can be mounted on either side of
shelf. Attach the cable management bracket using (2) 8-32 screws and (2) 8-32
nuts. Using cotter pins and clevis pins, attach in desired configuration.
Proceed to Final Assembly on page 4.
Cotter Pin
Clevis Pins
Clevis Pin
Step 2.
Adjust Depth:
Adjust the rear brackets to fit your rack mounting depth and attach
to slide rails using (4) 8-32 screws and (4) 8-32 nuts.
Note: You must extend the slide rails to install the nuts.
Rear Brackets
Mounting Depth
Cable
Management
Arms
Cable
Management
Bracket
