04 - VBOX Sigma Configuration
Configuration of VBOX Sigma is performed using a Wi-Fi hotspot created by the unit. The hotspot name and IP address
is displayed on the
of the unit when powered, accessed by using the
on
the front of the unit.
Using a phone or a computer, navigate to the Wi-Fi settings on the device and connect to the hotspot name (RL-212101
in the example below). Open an internet browser and enter the IP address (10.10.10.1 in the example below) within the
address bar.
The VBOX Sigma setup page is then displayed, which includes the GNSS engine status, Wi-Fi, modem, NTRIP caster
settings, CAN, VBO log and status information. The serial number and firmware version of the unit is displayed on the
bottom right of the page.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/VBOX_Sigma_User_Guide/04_-
_VBOX_Sigma_Configuration
20
