manualshive.com logo in svg

Racelogic MFD Touch, Руководство пользователя

Поделиться
Скачать
Racelogic MFD Touch Скачать руководство пользователя страница 101

in the bottom left corner to return to the Settings screen without saving.

Notes:

•

The maximum input value is 9999.

•

The minimum input value is 0.1

.

•

One decimal place resolution is available to values under 1000.

Target Range

This option defines the range of the background bar (set as 10 by default). You can change the colour used for this bar
(green by default) by pressing on the Bar option in the

Colours

settings area.

To change the range value, press the value box and use the presented keypad to select the required value. Using the
default range value of 10 as an example, for a target value of 100, the bar range would be from 95 – 105.

Target Range Keypad Example

Save the selected value by pressing the

Confirm

button

https://en.racelogic.support//Product_Info/Displays/MFD_Touch/MFD_Touch_User_Guide/04_-_MFD_Touch_Data_Display/

MFD_Touch_-_Target_Screen

101

Содержание MFD Touch













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды