RACCEWAY e-STRADA, Руководство пользователя, Страница: 26 / 102

- 25 -
Troubleshooting
Problem Condition Check Solution
When
I turn my
Vehicle
on
nothing
happens.
1. No any light
Indications on the
display.
1. Check the main
breaker under the
seat if it is on “ON”
position.
2. Check power
Connection and
battery level.
1. Flip the breaker lever on
“ON”
2. Fasten connections.
2.Power indication
light is on
3.Check battery and
motor connection
3. Clean and fasten battery
terminal connectors.
4. Fasten the motor
connections With the
controller under seat
3.Power indication
light is on and the
break light is “on”.
4. Check the break
levers if they return to
normal position.
5. Loosen the break. If there
is any corrosion replace.
Contact the supplier.
5. Battery voltage is
too low.
6. Charge or replace
battery. Contact the
supplier.
The Throttle
does not
work or
switch on,
the vehicle
moves
without
acceleration.
1. The Throttle
does not return to
stop position.
1. Check the grip for
damage
2. Check the Throttle
spring.
3.The Throttle handle
if it is loose
1.Use a flat head screwdriver
to adjust the gap between the
rubber handle and the cover.
2. Readjust the Throttle
spring position. Contact
the supplier
3. Check Throttle
connections.Contact the
supplier.
The range is
low
Charger light is off 1. Bad connection
between the charger
and the battery.
2. Charger doesn’t
charge
1. Check the charger
plug position.
2. Replace the charger
Battery doesn’t
hold the charge
1.Connections
between the batteries
are not good
2. Bad battery cell
1.Check all connections
between the batteries
2. Replace the bad
battery cell
The breaks
are not
working
properly
1. Break levers go
too deep
2. No breaking
power
1.Needs adjustment
2. Break pads are
dirty or need
replacement
1. Adjust the break cable –
see instructions
2. Clean break pads using
sand paper or replace