-4-
4. Before you start using your
pressure washer
4.1 Mounting of Spray gun holder
4.1.1. Press the spray gun and lance holder (9) on
to the machine.
4.2 Mounting of holder for power cord
4.2.1. Press the holder for power cord (3) on to
the machine.
4.3 Mounting of wheels
4.3.1. Mount the wheels bracket by pressing it into
the guide at the bottom of the machine and
mounting the screw.
4.3.2. Mount the wheels by pressing them into the
bracket.
4.4 Mounting of trolley handle (models with
trolley handle)
4.4.1. Place the trolley handle on the machine.
4.4.2. Secure the handle by mounting the 2
screws.
4.5 Mounting of quick coupling
4.5.1. Screw the quick coupling tight on to the
water inlet (6).
Note:
The inlet filter (6a) must always be fitted in
the water inlet pipe to filter out sand, limestone
and other impurities as these will damage the
pump valves.
Caution:
Failure to fit the filter will
invalidate the guarantee.
